Info: '1) If ADF was used, the scan area selected may be larger than the document.'
3:
Bounds: x1=20, y1=190, x2=271, y2=210
Type: -120
Info: '2) Try SCAN again.'
DITL_6031.txt
Items: (4 entries)
0:
Bounds: x1=371, y1=214, x2=431, y2=234
Type: 4
Info: 'OK'
1:
Bounds: x1=145, y1=25, x2=421, y2=45
Type: -120
Info: 'The Fujitsu Scanner cannot be accessed!'
2:
Bounds: x1=20, y1=130, x2=339, y2=150
Type: -120
Info: '1) Is the scanner turned on?'
3:
Bounds: x1=20, y1=160, x2=291, y2=180
Type: -120
Info: '2) Are both cables connected properly?'
DITL_6030.txt
Items: (38 entries)
0:
Bounds: x1=407, y1=288, x2=467, y2=308
Type: 4
Info: 'OK'
1:
Bounds: x1=5, y1=40, x2=115, y2=60
Type: 6
Info: 'Flatbed'
2:
Bounds: x1=5, y1=60, x2=115, y2=80
Type: 6
Info: 'ADF'
3:
Bounds: x1=5, y1=80, x2=115, y2=100
Type: 6
Info: 'Operator Set'
4:
Bounds: x1=5, y1=140, x2=120, y2=160
Type: 6
Info: 'Lightest - OCR'
5:
Bounds: x1=5, y1=160, x2=120, y2=180
Type: 6
Info: 'Lighter - OCR'
6:
Bounds: x1=5, y1=180, x2=120, y2=200
Type: 6
Info: 'Light - OCR'
7:
Bounds: x1=5, y1=200, x2=120, y2=220
Type: 6
Info: 'Dark - OCR'
8:
Bounds: x1=5, y1=220, x2=120, y2=240
Type: 6
Info: 'Darker - OCR'
9:
Bounds: x1=5, y1=240, x2=120, y2=260
Type: 6
Info: 'Darkest - OCR'
10:
Bounds: x1=5, y1=260, x2=120, y2=280
Type: 6
Info: 'Dark - Image'
11:
Bounds: x1=5, y1=280, x2=120, y2=300
Type: 6
Info: 'Light - Image'
12:
Bounds: x1=150, y1=40, x2=260, y2=60
Type: 6
Info: 'Line drawing'
13:
Bounds: x1=150, y1=60, x2=260, y2=80
Type: 6
Info: 'Photograph'
14:
Bounds: x1=150, y1=80, x2=260, y2=100
Type: 6
Info: 'Operator Set'
15:
Bounds: x1=150, y1=140, x2=260, y2=160
Type: 6
Info: 'Off'
16:
Bounds: x1=150, y1=160, x2=260, y2=180
Type: 6
Info: 'On'
17:
Bounds: x1=150, y1=180, x2=260, y2=200
Type: 6
Info: 'Operator Set'
18:
Bounds: x1=150, y1=240, x2=320, y2=260
Type: 6
Info: 'Standard dither mode'
19:
Bounds: x1=150, y1=260, x2=320, y2=280
Type: 6
Info: 'High resolution mode'
20:
Bounds: x1=150, y1=280, x2=320, y2=300
Type: 6
Info: 'High gradation mode 1'
21:
Bounds: x1=150, y1=300, x2=317, y2=320
Type: 6
Info: 'High gradation mode 2'
22:
Bounds: x1=340, y1=40, x2=450, y2=60
Type: 6
Info: 'OCR'
23:
Bounds: x1=340, y1=60, x2=450, y2=80
Type: 6
Info: 'Image'
24:
Bounds: x1=340, y1=140, x2=450, y2=160
Type: 6
Info: 'Ballpoint pen'
25:
Bounds: x1=340, y1=120, x2=450, y2=140
Type: 6
Info: 'Ordinary'
26:
Bounds: x1=340, y1=200, x2=450, y2=220
Type: 5
Info: '2X2 Matrix'
27:
Bounds: x1=340, y1=220, x2=450, y2=240
Type: 5
Info: '3X3 Matrix'
28:
Bounds: x1=340, y1=240, x2=450, y2=260
Type: 5
Info: '4X4 Matrix'
29:
Bounds: x1=340, y1=260, x2=450, y2=280
Type: 5
Info: '5X5 Matrix'
30:
Bounds: x1=150, y1=10, x2=231, y2=30
Type: -120
Info: 'Image type'
31:
Bounds: x1=150, y1=210, x2=246, y2=230
Type: -120
Info: 'Dither Pattern'
32:
Bounds: x1=5, y1=110, x2=85, y2=130
Type: -120
Info: 'Threshold'
33:
Bounds: x1=340, y1=10, x2=450, y2=30
Type: -120
Info: 'Smoothing mode'
34:
Bounds: x1=340, y1=90, x2=450, y2=110
Type: -120
Info: 'Filtering'
35:
Bounds: x1=340, y1=170, x2=446, y2=190
Type: -120
Info: 'Noise Removing'
36:
Bounds: x1=5, y1=10, x2=103, y2=30
Type: -120
Info: 'Image Source'
37:
Bounds: x1=150, y1=110, x2=300, y2=130
Type: -120
Info: 'Half-tone'
DITL_4002.txt
Items: (8 entries)
0:
Bounds: x1=248, y1=160, x2=350, y2=180
Type: 4
Info: 'Rename'
1:
Bounds: x1=248, y1=190, x2=350, y2=210
Type: 4
Info: 'Cancel'
2:
Bounds: x1=10, y1=235, x2=300, y2=251
Type: -120
Info: ''
3:
Bounds: x1=244, y1=5, x2=350, y2=24
Type: -128
Info: ''
4:
Bounds: x1=-305, y1=180, x2=-198, y2=196
Type: -124
Info: 'Eject'
5:
Bounds: x1=-305, y1=202, x2=-198, y2=218
Type: -124
Info: 'Drive'
6:
Bounds: x1=10, y1=256, x2=300, y2=272
Type: 16
Info: ''
7:
Bounds: x1=10, y1=30, x2=240, y2=224
Type: -128
Info: ''
DITL_4001.txt
Items: (14 entries)
0:
Bounds: x1=346, y1=119, x2=436, y2=137
Type: 4
Info: 'Open'
1:
Bounds: x1=571, y1=0, x2=589, y2=80
Type: 4
Info: 'Hidden'
2:
Bounds: x1=346, y1=143, x2=436, y2=161
Type: 4
Info: 'Cancel'
3:
Bounds: x1=332, y1=23, x2=447, y2=43
Type: -128
Info: ''
4:
Bounds: x1=346, y1=51, x2=436, y2=69
Type: 4
Info: 'Eject'
5:
Bounds: x1=346, y1=75, x2=436, y2=93
Type: 4
Info: 'Drive'
6:
Bounds: x1=12, y1=39, x2=309, y2=185
Type: 0
Info: ''
7:
Bounds: x1=309, y1=39, x2=326, y2=185
Type: 0
Info: ''
8:
Bounds: x1=352, y1=106, x2=440, y2=107
Type: -128
Info: ''
9:
Bounds: x1=532, y1=0, x2=628, y2=101
Type: -120
Info: ''
10:
Bounds: x1=346, y1=167, x2=436, y2=-185
Type: 4
Info: 'Get Info'
11:
Bounds: x1=304, y1=270, x2=364, y2=290
Type: 4
Info: 'Rename'
12:
Bounds: x1=372, y1=270, x2=432, y2=290
Type: 4
Info: 'Delete'
13:
Bounds: x1=12, y1=191, x2=436, y2=295
Type: -64
Info: 'Ù'
DITL_4000.txt
Items: (11 entries)
0:
Bounds: x1=4, y1=280, x2=112, y2=298
Type: 4
Info: 'Display Help'
1:
Bounds: x1=571, y1=0, x2=589, y2=80
Type: 4
Info: 'Hidden'
2:
Bounds: x1=124, y1=280, x2=232, y2=298
Type: 4
Info: 'Continue'
3:
Bounds: x1=1232, y1=49, x2=1347, y2=69
Type: -128
Info: ''
4:
Bounds: x1=1256, y1=78, x2=1336, y2=96
Type: 4
Info: 'Eject'
5:
Bounds: x1=1256, y1=103, x2=1336, y2=121
Type: 4
Info: 'Drive'
6:
Bounds: x1=4, y1=44, x2=232, y2=270
Type: 0
Info: ''
7:
Bounds: x1=231, y1=44, x2=248, y2=270
Type: 0
Info: ''
8:
Bounds: x1=1252, y1=134, x2=1340, y2=135
Type: -128
Info: ''
9:
Bounds: x1=532, y1=0, x2=628, y2=101
Type: -120
Info: ''
10:
Bounds: x1=0, y1=2, x2=490, y2=20
Type: -120
Info: 'Choose any Topic, Tool, or Menu ...'
DITL_3999.txt
Items: (37 entries)
0:
Bounds: x1=198, y1=234, x2=305, y2=250
Type: 4
Info: 'Save'
1:
Bounds: x1=198, y1=256, x2=305, y2=272
Type: 4
Info: 'Cancel'
2:
Bounds: x1=10, y1=235, x2=190, y2=251
Type: -120
Info: 'Save as:'
3:
Bounds: x1=194, y1=5, x2=296, y2=24
Type: -128
Info: ''
4:
Bounds: x1=198, y1=180, x2=305, y2=196
Type: 4
Info: 'Eject'
5:
Bounds: x1=198, y1=202, x2=305, y2=218
Type: 4
Info: 'Drive'
6:
Bounds: x1=10, y1=256, x2=190, y2=272
Type: 16
Info: ''
7:
Bounds: x1=10, y1=30, x2=190, y2=224
Type: -128
Info: ''
8:
Bounds: x1=198, y1=25, x2=310, y2=42
Type: 6
Info: 'All'
9:
Bounds: x1=198, y1=43, x2=310, y2=60
Type: 6
Info: 'SubImage'
10:
Bounds: x1=-310, y1=100, x2=-198, y2=119
Type: -122
Info: '1 Bit'
11:
Bounds: x1=-310, y1=100, x2=-198, y2=119
Type: -122
Info: '2 Bit'
12:
Bounds: x1=-310, y1=100, x2=-198, y2=119
Type: -122
Info: '3 Bit'
13:
Bounds: x1=198, y1=115, x2=310, y2=132
Type: 6
Info: '4 Bit'
14:
Bounds: x1=-310, y1=100, x2=-198, y2=119
Type: -122
Info: '5 Bit'
15:
Bounds: x1=198, y1=133, x2=310, y2=150
Type: 6
Info: '6 Bit'
16:
Bounds: x1=-310, y1=100, x2=-198, y2=119
Type: -122
Info: '7 Bit'
17:
Bounds: x1=198, y1=151, x2=310, y2=168
Type: 6
Info: '8 Bit'
18:
Bounds: x1=315, y1=5, x2=469, y2=24
Type: 6
Info: 'Black & White'
19:
Bounds: x1=315, y1=25, x2=469, y2=44
Type: 6
Info: 'Gray'
20:
Bounds: x1=315, y1=45, x2=469, y2=64
Type: 6
Info: 'Color'
21:
Bounds: x1=315, y1=65, x2=469, y2=84
Type: 6
Info: 'Make Separations'
22:
Bounds: x1=198, y1=70, x2=310, y2=87
Type: 6
Info: 'Uncompressed'
23:
Bounds: x1=198, y1=88, x2=310, y2=105
Type: 6
Info: 'Compressed'
24:
Bounds: x1=198, y1=70, x2=310, y2=87
Type: 6
Info: 'Generic'
25:
Bounds: x1=198, y1=88, x2=310, y2=105
Type: 6
Info: 'Macintosh'
26:
Bounds: x1=198, y1=70, x2=310, y2=87
Type: 6
Info: 'Actual Size'
27:
Bounds: x1=198, y1=88, x2=310, y2=105
Type: 6
Info: 'Maximum Size'
28:
Bounds: x1=315, y1=95, x2=469, y2=114
Type: 6
Info: 'TIFF'
29:
Bounds: x1=315, y1=115, x2=469, y2=134
Type: 6
Info: 'EPSF'
30:
Bounds: x1=315, y1=135, x2=469, y2=154
Type: 6
Info: 'RIFF'
31:
Bounds: x1=315, y1=155, x2=469, y2=174
Type: 6
Info: 'PICT'
32:
Bounds: x1=315, y1=175, x2=469, y2=194
Type: 6
Info: 'PageMaker 1.2'
33:
Bounds: x1=315, y1=195, x2=469, y2=214
Type: 6
Info: 'MacPaint'
34:
Bounds: x1=315, y1=215, x2=469, y2=234
Type: 6
Info: 'SuperPaint'
35:
Bounds: x1=315, y1=235, x2=469, y2=254
Type: 6
Info: 'PostScript'
36:
Bounds: x1=-200, y1=255, x2=-100, y2=274
Type: -122
Info: 'Smalltalk Form'
DITL_155.txt
Items: (14 entries)
0:
Bounds: x1=394, y1=20, x2=454, y2=40
Type: 4
Info: 'OK'
1:
Bounds: x1=314, y1=20, x2=374, y2=40
Type: 4
Info: 'Cancel'
2:
Bounds: x1=15, y1=10, x2=80, y2=29
Type: 6
Info: 'RGB'
3:
Bounds: x1=15, y1=30, x2=80, y2=49
Type: 6
Info: 'CMYB'
4:
Bounds: x1=15, y1=60, x2=125, y2=79
Type: -120
Info: 'Black UCR'
5:
Bounds: x1=15, y1=130, x2=125, y2=149
Type: -120
Info: 'Magenta UCR'
6:
Bounds: x1=15, y1=200, x2=125, y2=219
Type: -120
Info: 'Yellow UCR'
7:
Bounds: x1=130, y1=60, x2=170, y2=79
Type: 16
Info: ''
8:
Bounds: x1=130, y1=130, x2=170, y2=149
Type: 16
Info: ''
9:
Bounds: x1=130, y1=200, x2=170, y2=219
Type: 16
Info: ''
10:
Bounds: x1=180, y1=60, x2=485, y2=125
Type: -120
Info: 'The Black UCR value specifies the minimum percentage color density required for each of cyan, magenta, and yellow before any black will be printed.'
11:
Bounds: x1=180, y1=130, x2=485, y2=195
Type: -120
Info: 'The Magenta UCR value is the percentage of CYAN by which the MAGENTA is to be reduced when printing MAGENTA in areas where cyan and magenta overlap.'
12:
Bounds: x1=180, y1=200, x2=485, y2=265
Type: -120
Info: 'The Yellow UCR value is the percentage of MAGENTA by which the YELLOW is to be reduced when printing YELLOW in areas where magenta and yellow overlap.'
13:
Bounds: x1=390, y1=16, x2=458, y2=44
Type: -64
Info: 'ˆ'
DITL_153.txt
Items: (2 entries)
0:
Bounds: x1=6, y1=5, x2=140, y2=24
Type: 6
Info: 'All'
1:
Bounds: x1=6, y1=25, x2=140, y2=45
Type: 6
Info: 'SubImage'
DITL_152.txt
Items: (29 entries)
0:
Bounds: x1=420, y1=176, x2=480, y2=196
Type: 4
Info: 'OK'
1:
Bounds: x1=420, y1=147, x2=480, y2=167
Type: 4
Info: 'Cancel'
2:
Bounds: x1=6, y1=30, x2=140, y2=49
Type: 6
Info: 'All'
3:
Bounds: x1=6, y1=50, x2=140, y2=69
Type: 6
Info: 'SubImage'
4:
Bounds: x1=6, y1=80, x2=140, y2=99
Type: 6
Info: 'Landscape'
5:
Bounds: x1=6, y1=100, x2=140, y2=119
Type: 6
Info: 'Portrait'
6:
Bounds: x1=140, y1=30, x2=480, y2=49
Type: 6
Info: 'Gray Scale'
7:
Bounds: x1=140, y1=50, x2=480, y2=69
Type: 6
Info: 'Full Color 1 (Three color composite)'
8:
Bounds: x1=140, y1=70, x2=480, y2=89
Type: 6
Info: 'Full Color 2 (Four color composite)'
9:
Bounds: x1=140, y1=90, x2=480, y2=109
Type: 6
Info: 'Color Separations'
10:
Bounds: x1=6, y1=130, x2=200, y2=149
Type: 6
Info: 'Do Not Enlarge'
11:
Bounds: x1=6, y1=150, x2=200, y2=169
Type: 6
Info: 'Increase by Replication'
12:
Bounds: x1=6, y1=170, x2=200, y2=189
Type: 6
Info: 'Maximize by Interpolation'
13:
Bounds: x1=6, y1=190, x2=200, y2=209
Type: 6
Info: 'Front Panel Control'
14:
Bounds: x1=240, y1=125, x2=310, y2=145
Type: -120
Info: 'Copies'
15:
Bounds: x1=315, y1=125, x2=370, y2=140
Type: 16
Info: ''
16:
Bounds: x1=350, y1=240, x2=440, y2=259
Type: 6
Info: 'Percent'
17:
Bounds: x1=350, y1=260, x2=440, y2=279
Type: 6
Info: 'Pixels'
18:
Bounds: x1=6, y1=240, x2=60, y2=259
Type: -120
Info: 'Top'
19:
Bounds: x1=186, y1=240, x2=240, y2=259
Type: -120
Info: 'Left'
20:
Bounds: x1=6, y1=263, x2=60, y2=282
Type: -120
Info: 'Bottom'
21:
Bounds: x1=186, y1=263, x2=240, y2=282
Type: -120
Info: 'Right'
22:
Bounds: x1=66, y1=240, x2=160, y2=255
Type: 16
Info: ''
23:
Bounds: x1=244, y1=240, x2=340, y2=255
Type: 16
Info: ''
24:
Bounds: x1=66, y1=263, x2=160, y2=278
Type: 16
Info: ''
25:
Bounds: x1=244, y1=263, x2=340, y2=278
Type: 16
Info: ''
26:
Bounds: x1=20, y1=216, x2=340, y2=235
Type: -120
Info: '------------ White Padding ------------'
27:
Bounds: x1=6, y1=3, x2=323, y2=23
Type: -120
Info: '4693D Print Options'
28:
Bounds: x1=416, y1=172, x2=484, y2=200
Type: -64
Info: 'ˆ'
DITL_151.txt
Items: (11 entries)
0:
Bounds: x1=420, y1=212, x2=480, y2=232
Type: 4
Info: 'OK'
1:
Bounds: x1=420, y1=182, x2=480, y2=202
Type: 4
Info: 'Cancel'
2:
Bounds: x1=7, y1=175, x2=190, y2=194
Type: 6
Info: 'Align Left at Cursor'
3:
Bounds: x1=7, y1=195, x2=190, y2=214
Type: 6
Info: 'Align Center at Cursor'
4:
Bounds: x1=7, y1=215, x2=190, y2=234
Type: 6
Info: 'Align Right at Cursor'
5:
Bounds: x1=200, y1=175, x2=383, y2=194
Type: 6
Info: 'Align Left in Image'
6:
Bounds: x1=200, y1=195, x2=383, y2=214
Type: 6
Info: 'Align Center in Image'
7:
Bounds: x1=200, y1=215, x2=383, y2=234
Type: 6
Info: 'Align Right in Image'
8:
Bounds: x1=7, y1=10, x2=485, y2=30
Type: -120
Info: 'Enter text (^0, ^1):'
9:
Bounds: x1=7, y1=31, x2=485, y2=170
Type: 16
Info: ''
10:
Bounds: x1=416, y1=208, x2=484, y2=236
Type: -64
Info: 'ˆ'
DITL_150.txt
Items: (52 entries)
0:
Bounds: x1=400, y1=270, x2=460, y2=290
Type: 4
Info: 'OK'
1:
Bounds: x1=320, y1=270, x2=380, y2=290
Type: 4
Info: 'Cancel'
2:
Bounds: x1=6, y1=32, x2=130, y2=52
Type: -120
Info: 'Number of Copies'
3:
Bounds: x1=131, y1=32, x2=190, y2=48
Type: 16
Info: ''
4:
Bounds: x1=130, y1=52, x2=270, y2=71
Type: 5
Info: 'Manual Feed'
5:
Bounds: x1=6, y1=6, x2=270, y2=26
Type: -120
Info: '^0'
6:
Bounds: x1=280, y1=41, x2=350, y2=57
Type: 16
Info: ''
7:
Bounds: x1=370, y1=41, x2=440, y2=57
Type: 16
Info: ''
8:
Bounds: x1=276, y1=78, x2=306, y2=94
Type: 6
Info: 'in'
9:
Bounds: x1=309, y1=78, x2=352, y2=94
Type: 6
Info: 'mm'
10:
Bounds: x1=355, y1=78, x2=413, y2=94
Type: 6
Info: 'points'
11:
Bounds: x1=416, y1=78, x2=475, y2=94
Type: 6
Info: 'picas'
12:
Bounds: x1=276, y1=60, x2=304, y2=75
Type: 6
Info: 'L'
13:
Bounds: x1=305, y1=60, x2=333, y2=75
Type: 6
Info: 'C'
14:
Bounds: x1=334, y1=60, x2=362, y2=75
Type: 6
Info: 'R'
15:
Bounds: x1=443, y1=28, x2=472, y2=43
Type: 6
Info: 'T'
16:
Bounds: x1=443, y1=44, x2=472, y2=59
Type: 6
Info: 'C'
17:
Bounds: x1=443, y1=60, x2=472, y2=75
Type: 6
Info: 'B'
18:
Bounds: x1=272, y1=13, x2=476, y2=96
Type: -64
Info: 'Ù'
19:
Bounds: x1=344, y1=6, x2=404, y2=21
Type: -120
Info: ' Position '
20:
Bounds: x1=279, y1=21, x2=441, y2=38
Type: -120
Info: 'Horizontal Vertical'
21:
Bounds: x1=6, y1=102, x2=120, y2=121
Type: 6
Info: 'Portrait'
22:
Bounds: x1=6, y1=122, x2=120, y2=141
Type: 6
Info: 'Landscape'
23:
Bounds: x1=290, y1=170, x2=479, y2=187
Type: -120
Info: 'Postscript instructions'
24:
Bounds: x1=290, y1=190, x2=479, y2=255
Type: 16
Info: ''
25:
Bounds: x1=6, y1=52, x2=120, y2=71
Type: 6
Info: 'All'
26:
Bounds: x1=6, y1=72, x2=120, y2=91
Type: 6
Info: 'SubImage'
27:
Bounds: x1=130, y1=72, x2=270, y2=91
Type: 5
Info: 'Negative'
28:
Bounds: x1=-270, y1=102, x2=-130, y2=121
Type: 6
Info: ''
29:
Bounds: x1=130, y1=102, x2=270, y2=121
Type: 6
Info: 'Black & White'
30:
Bounds: x1=130, y1=122, x2=270, y2=141
Type: 6
Info: 'Color'
31:
Bounds: x1=130, y1=142, x2=270, y2=161
Type: 6
Info: 'Make Separations'
32:
Bounds: x1=6, y1=150, x2=120, y2=169
Type: 6
Info: 'Default Screen'
33:
Bounds: x1=6, y1=170, x2=120, y2=189
Type: 6
Info: 'Dot Screen'
34:
Bounds: x1=6, y1=190, x2=120, y2=209
Type: 6
Info: 'Oval Screen'
35:
Bounds: x1=6, y1=210, x2=120, y2=229
Type: 6
Info: 'Line Screen'
36:
Bounds: x1=6, y1=230, x2=120, y2=249
Type: 6
Info: 'Grid Screen'
37:
Bounds: x1=6, y1=250, x2=120, y2=269
Type: 6
Info: 'Star Screen'
38:
Bounds: x1=6, y1=270, x2=120, y2=289
Type: 6
Info: 'Dither Screen'
39:
Bounds: x1=290, y1=102, x2=479, y2=121
Type: 6
Info: 'Full Page'
40:
Bounds: x1=290, y1=122, x2=479, y2=141
Type: 6
Info: 'Actual Size'
41:
Bounds: x1=290, y1=142, x2=395, y2=161
Type: 6
Info: 'Scale Factor'
42:
Bounds: x1=400, y1=144, x2=479, y2=161
Type: 16
Info: ''
43:
Bounds: x1=130, y1=172, x2=270, y2=191
Type: 6
Info: 'Default Frequency'
44:
Bounds: x1=130, y1=192, x2=145, y2=211
Type: 6
Info: ''
45:
Bounds: x1=150, y1=194, x2=196, y2=211
Type: 16
Info: ''
46:
Bounds: x1=201, y1=194, x2=270, y2=211
Type: -120
Info: 'lines/inch'
47:
Bounds: x1=130, y1=220, x2=270, y2=239
Type: 6
Info: 'Default Angle'
48:
Bounds: x1=130, y1=240, x2=145, y2=259
Type: 6
Info: ''
49:
Bounds: x1=150, y1=242, x2=251, y2=259
Type: 16
Info: ''
50:
Bounds: x1=255, y1=242, x2=270, y2=259
Type: -120
Info: '°'
51:
Bounds: x1=396, y1=266, x2=464, y2=294
Type: -64
Info: 'ˆ'
DITL_144.txt
Items: (2 entries)
0:
Bounds: x1=225, y1=180, x2=355, y2=210
Type: 4
Info: 'That’s Life'
1:
Bounds: x1=7, y1=57, x2=380, y2=175
Type: -120
Info: 'Oops... the changes you made just got lost.Insufficient Reserved Memory for ^1 ^0.1. Try reducing the number of ^02. Try increasing reserved memory.'
DITL_134.txt
Items: (3 entries)
0:
Bounds: x1=20, y1=105, x2=160, y2=135
Type: 4
Info: 'Reset Crop Borders'
1:
Bounds: x1=220, y1=105, x2=360, y2=135
Type: 4
Info: 'Cancel'
2:
Bounds: x1=7, y1=57, x2=360, y2=97
Type: -120
Info: 'The screen window is not inside the crop borders.'
DITL_105.txt
Items: (3 entries)
0:
Bounds: x1=352, y1=226, x2=432, y2=244
Type: 4
Info: 'OK'
1:
Bounds: x1=16, y1=226, x2=96, y2=244
Type: 4
Info: 'Cancel'
2:
Bounds: x1=12, y1=57, x2=436, y2=190
Type: -120
Info: ''
DITL_104.txt
Items: (4 entries)
0:
Bounds: x1=16, y1=194, x2=96, y2=212
Type: 4
Info: 'Yes'
1:
Bounds: x1=16, y1=226, x2=96, y2=244
Type: 4
Info: 'No'
2:
Bounds: x1=352, y1=226, x2=432, y2=244
Type: 4
Info: 'Cancel'
3:
Bounds: x1=12, y1=57, x2=436, y2=190
Type: -120
Info: ''
DITL_103.txt
Items: (3 entries)
0:
Bounds: x1=16, y1=226, x2=96, y2=244
Type: 4
Info: 'Continue'
1:
Bounds: x1=352, y1=226, x2=432, y2=244
Type: 4
Info: 'Cancel'
2:
Bounds: x1=12, y1=57, x2=436, y2=190
Type: -120
Info: ''
DITL_102.txt
Items: (2 entries)
0:
Bounds: x1=352, y1=226, x2=432, y2=244
Type: 4
Info: 'Cancel'
1:
Bounds: x1=12, y1=57, x2=436, y2=190
Type: -120
Info: ''
DITL_101.txt
Items: (2 entries)
0:
Bounds: x1=352, y1=226, x2=432, y2=244
Type: 4
Info: 'OK'
1:
Bounds: x1=12, y1=57, x2=436, y2=190
Type: -120
Info: ''
DITL_3.txt
Items: (22 entries)
0:
Bounds: x1=415, y1=250, x2=475, y2=270
Type: 4
Info: 'OK'
1:
Bounds: x1=415, y1=220, x2=475, y2=240
Type: 4
Info: 'Cancel'
2:
Bounds: x1=10, y1=49, x2=80, y2=66
Type: 4
Info: 'Increase'
3:
Bounds: x1=10, y1=69, x2=80, y2=86
Type: 4
Info: 'Decrease'
4:
Bounds: x1=10, y1=109, x2=80, y2=126
Type: 4
Info: 'Increase'
5:
Bounds: x1=10, y1=132, x2=80, y2=149
Type: 4
Info: 'Decrease'
6:
Bounds: x1=90, y1=59, x2=290, y2=79
Type: -120
Info: 'Black Reference Offset:'
7:
Bounds: x1=90, y1=119, x2=290, y2=139
Type: -120
Info: 'White level gain:'
8:
Bounds: x1=295, y1=59, x2=470, y2=79
Type: -120
Info: ' '
9:
Bounds: x1=295, y1=119, x2=470, y2=139
Type: -120
Info: ' '
10:
Bounds: x1=10, y1=172, x2=70, y2=192
Type: -120
Info: 'Offset:'
11:
Bounds: x1=71, y1=172, x2=171, y2=192
Type: -120
Info: 'not calibrated'
12:
Bounds: x1=185, y1=172, x2=300, y2=192
Type: -120
Info: 'Black Reference:'
13:
Bounds: x1=301, y1=172, x2=401, y2=192
Type: -120
Info: 'not calibrated'
14:
Bounds: x1=10, y1=198, x2=275, y2=218
Type: -120
Info: 'Right White:'
15:
Bounds: x1=276, y1=198, x2=376, y2=218
Type: -120
Info: 'not calibrated'
16:
Bounds: x1=10, y1=224, x2=275, y2=244
Type: -120
Info: 'Center White:'
17:
Bounds: x1=276, y1=224, x2=376, y2=244
Type: -120
Info: 'not calibrated'
18:
Bounds: x1=10, y1=250, x2=275, y2=270
Type: -120
Info: 'Left White:'
19:
Bounds: x1=276, y1=250, x2=376, y2=270
Type: -120
Info: 'not calibrated'
20:
Bounds: x1=118, y1=12, x2=337, y2=32
Type: -120
Info: 'Scanner Calibration Modification'
21:
Bounds: x1=411, y1=246, x2=479, y2=274
Type: -64
Info: 'ˆ'
DITL_2.txt
Items: (20 entries)
0:
Bounds: x1=405, y1=245, x2=465, y2=265
Type: 4
Info: 'OK'
1:
Bounds: x1=107, y1=183, x2=132, y2=203
Type: 6
Info: '0'
2:
Bounds: x1=143, y1=183, x2=168, y2=203
Type: 6
Info: '1'
3:
Bounds: x1=179, y1=183, x2=204, y2=203
Type: 6
Info: '2'
4:
Bounds: x1=215, y1=183, x2=240, y2=203
Type: 6
Info: '3'
5:
Bounds: x1=251, y1=183, x2=276, y2=203
Type: 6
Info: '4'
6:
Bounds: x1=287, y1=183, x2=312, y2=203
Type: 6
Info: '5'
7:
Bounds: x1=323, y1=183, x2=348, y2=203
Type: 6
Info: '6'
8:
Bounds: x1=8, y1=185, x2=106, y2=205
Type: -120
Info: 'SCSI Address'
9:
Bounds: x1=190, y1=15, x2=470, y2=35
Type: -120
Info: ' '
10:
Bounds: x1=12, y1=245, x2=150, y2=265
Type: 4
Info: 'Calibrate'
11:
Bounds: x1=164, y1=245, x2=302, y2=265
Type: 4
Info: 'Modify Calibration'
12:
Bounds: x1=12, y1=15, x2=180, y2=34
Type: 6
Info: 'Canon IX-12'
13:
Bounds: x1=12, y1=35, x2=180, y2=54
Type: 6
Info: 'Canon IX-12F'
14:
Bounds: x1=12, y1=55, x2=180, y2=74
Type: 6
Info: 'Sharp JX-450'
15:
Bounds: x1=12, y1=75, x2=180, y2=94
Type: 6
Info: 'Fujitsu M3094'
16:
Bounds: x1=12, y1=95, x2=180, y2=114
Type: 6
Info: 'Fujitsu M3095'
17:
Bounds: x1=12, y1=115, x2=180, y2=134
Type: 6
Info: 'Panasonic FX-RS505'
18:
Bounds: x1=12, y1=135, x2=180, y2=154
Type: 6
Info: 'Mystery Scanner'
19:
Bounds: x1=401, y1=241, x2=469, y2=269
Type: -64
Info: 'ˆ'
DITL_1.txt
Items: (21 entries)
0:
Bounds: x1=415, y1=245, x2=475, y2=265
Type: 4
Info: 'OK'
1:
Bounds: x1=8, y1=15, x2=470, y2=35
Type: -120
Info: 'MacScan™ Version 1.49 January 2, 1989'
2:
Bounds: x1=8, y1=35, x2=470, y2=55
Type: -120
Info: 'MacScan™ is a Trademark of New Image Technology.'